-
Manning AirScan iR main
Monitor all points of detection continuously with the diffusion design sensor. Features & Benefits- Rapid response to refrigerants including R-404a, R-22, R-507 or R-134a
- No moving parts and pumps/filters not required
- Can be used with any Honeywell Analytics readout
-
Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line
Features & Benefits
- Standalone, standalone with remote (dual gas mode) or network versions available
- Saves energy through Demand Control Ventilation
- Advanced sensing technology detects CO, NO2, O2, H2, H2S, CH4, C3H3
-
Now one tough sensor can work in three harsh environments. With the stability you can count and low cost you want, the EC-FX-NH3 is the new gold standard in ammonia detection.
Features & Benefits- Responds quickly to ammonia concentrations in low parts per million (PPM)
- Rugged construction for long-term reliability
- ATMOSTM Technology for environmental flexibility
-
Designed for simple installation and operation, the 301C continuously monitors and controls toxic gases, combustible gases and oxygen hazards. Features & Benefits- User friendly with zero maintenance
- Low installation costs
- Automatic quick self-test and warm-up
-
301EM Expansion Module acts as a controller for up to twenty remote refrigerant sensors and detects a wide variety of gases. Features & Benefits- Easy to read LCD display
- Auto-diagnostic capabilities
- Convenient stand-alone or network operation
-
The TR-2000 delivers all the advantages of electrochemical sensing in a durable, long life (5 year) package that is priced to compete against less accurate MOS/Solid State sensors. The loop powered sensor delivers a linear 4-20 ma output that is easily integrated into any building control, ventilation or alarm application. -
The TR3210 is a high accuracy, Electrochemical gas sensor that can be factory configured to measure a wide range of gases applicable to health and safety applications. This loop-powered sensor delivers a linear 4-20 ma output that is easily integrated into any building control, ventilation or alarm application. -
The AMC-1AD Series Gas Monitor provides a highly economical monitoring package for multipoint vehicle exhaust monitoring applications. Incorporating micro-controller based design; it provides accuracy, durability, and ease of use within a compact package. The AMC-1AD Series Monitor works with any combination of AMC-122X Series sensor modules, with up to 8 modules per zone. -
The AMC-1AVCs Gas Monitor provides an all-in-one monitoring package for mixed vehicle applications. Incorporating state of the art sensing technology and micro-controller based design; it provides accuracy, durability, and ease of use within a compact package. Features- Eligible for the EZ Cal Sensor Exchange Program
- 4‐20 mA Output per Gas
- Selectable 4‐20 mA, 0‐10 VDC, 2‐10 VDC Output of the peak gas concentration can be tied back to variable drives and fan motors for significant energy savings over traditional “all or nothing” ventilation strategies
-
The AMC 1ACOs Gas Monitor provides an all-in-one carbon monoxide monitoring package, incorporating state of the art sensing technology using microcontroller based design to provide accurate gas detection capabilities within a compact package. Features- Eligible for AMC EZ Cal Sensor Exchange Program
- 4‐20 mA Output can be tied back to variable drives and fan motors for significant energy savings over traditional “all or nothing” ventilation strategies
-
A versatile, self-contained dual gas sensor that is network ready for either peer-to-peer (master slave) operation or central control. Features:- Stand-alone operation with 1 or 2 adjustable alarm relays, indicators and strobe
- Pre-calibrated plug-and-play sensor modules
- Impact resistant water resistant enclosure.
-
The M-Controller is a multi-channel controller and alarm unit that utilizes both digital and analog communications to interface with a maximum of 32 remote digital QEL transmitter/sensors, and 8 analog transmitter/sensors. These are used to measure a wide variety of toxic gases such as CO, NO2, NH3, H2S, SO2, Refrigerants, Combustibles, and CO2. -
The Q5 Series smart toxic/combustible gas sensor/transmitters use various sensing technologies to detect a wide assortment of gases. The units are housed in a NEMA 4X enclosure with an integral buzzer that will meet the most stringent of applications. Features- Uses Electrochemical, Catalytic Bead and Infrared Sensors
- Pre-calibrated sensors available for easy replacement without calibration
- Three on-board user-programmable relays
-
The new Q8 Series of Explosion Proof Gas Detectors are used for applications that require a more rugged enclosure and meet Class 1 Division 2 requirements. Each unit comes standard with a digital display of concentration, relay status, STEL, TWA and peak daily value of the gas detected. Features- RS-485 communication
- 3 on-board relays
- 4-20 mA output
-
The new Q-Controller includes features that are unique to the gas detection industry. The system uses an RS-485 communication protocol that accommodates 128 channels through four digital ports. Features- Wireless Communication with smart devices
- Seven-inch touchscreen display
- Data-logging
-
The QIRF refrigerant gas detectors are the second generation of QEL proprietary designed transmitter/sensors. They are configured easily to meet the International Mechanical Code, ASHRAE 15, and B52 requirements. -
Using Honeywell's patented WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the Fire Sentry FS24X is a quantum leap in flame and fire detection. Sophisticated software algorithms and dual microprocessors ensure that the Fire Sentry FS24X has the highest fire detection performance combined with optimal false alarm rejection. Features- Low power consumption
- FirePic™ — pre-fire event data storage
- Dual microprocessors for reliable performance
-
The Fire Sentry FS10-R Unitized is a multi-spectral infrared electro-optical flame detector designed specifically for liquid paint or powder spray booth applications. Based on the Fire Sentry FS System 10, the FS10-R Unitized flame detector meets the need for a stand-alone capability and complies with the NFPA 33 Standard. Applications- Liquid Paint Spray Lines
- Aerosol Filling
- Powder Coating Booths
- Curing Ovens
-
The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. Features- Easy to replace
- Typical 2 to 5 years operational life
- Flammable, toxic and Oxygen versions available
-
Infrared point hydrocarbon gas detector certified for use in potentially explosive atmospheres. Features- Over 100,000 units installed worldwide
- Improved reliability
- Fast speed of response
-
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. Features- All-in-one gas monitoring solution
- Proven SurecellTM electrochemical sensors
- Global approvals
-
The Sensepoint XCD RTD series from Honeywell enables effective remote monitoring of toxic gases in Class 1, Div 2 areas while reducing the maintenance, training and overall cost of gas monitoring. Features- Common transmitter platform cuts stocking and procurement costs
- Obtain maximum coverage in areas not easily accessible
- Prevent false alarms with auto-inhibit during maintenance
-
World-renowned infrared open path flammable gas detector offering unrivaled performance and sensitivity. Searchline Excel employs a patented double band pass filter that fully compensates for all types of fog and / or rain, thereby allowing it to continue to operate accurately and reliably in all climatic conditions. Features- Fast speed of response provides earliest warning
- High sensitivity allows low alarm set points
- Works in inert atmospheres
-
Acting as the nerve center of a modular gas detection network, this multichannel system provides continuous monitoring of up to 96 sensors. Features- Simple push-button program facilitates adjustment
- Supports any combination of Honeywell Analytics gas sensors
- Immediate, at-a-glance status
- 24/7 Service
780-980-0799